FREE CONSULTATION ✓ FREE DESIGN ✓ FREE QUOTATIONS ON ALL STORAGE SYSTEMS ✓ AUSTRALIAN CERTIFIED ✓

Mezzanine Floor Inspections & Audits | Sydney & NSW

Keep your raised storage areas safe, compliant and productive. We inspect mezzanine floors (free-standing and rack-supported) for structural integrity, stairs and guarding, pallet gates, decking, fire clearances and signage—then issue a practical report with risk ratings, photos and a remediation plan.

Safety-first, standards-led
Checks aligned to AS 1657 (stairs/guarding), AS/NZS 1170.1 (loads), AS 4100 (steel) and NCC requirements.
Actionable audit report
Traffic-light risks, photos, punch-list with priorities and budget-level fixes.
Faster remediation
We supply and install stairs, handrails, gates, decking, signage & guarding if required.

Book an Inspection

Typically available within 5–10 business days. Emergency post-incident checks available.

What’s included in a mezzanine inspection

  • Structure & connections: posts, beams, joists, bracing, splice joints, fixings, corrosion, impact damage, alterations.
  • Decking & edges: condition, fixings, gaps, trip hazards, edge protection, kick plates/toe boards where required.
  • Stairs, ladders & landings: rise/going, handrails both sides (where applicable), mid-rails, landings & guardrails.
  • Guarding & pallet gates: height, mid-rail/mesh compliance, safe loading/unloading operation.
  • Load ratings: signage present, intended use vs design capacity (verification to documentation where available).
  • Fire & egress: sprinkler head clearance (where installed), exits/aisles, emergency lighting/visibility.
  • Housekeeping: access ways, lighting, slip/trip controls, edge marking, operator information.
  • Rack-supported mezzanines: racking condition and configuration (where applicable) and load signage.

What you receive

  • PDF report with photos, risk ratings (Critical/Major/Minor), and a fix-first remediation plan.
  • Compliance notes cross-referenced to relevant standards/requirements.
  • Optional quotation for repairs or upgrades (stairs/handrails/gates/decking/signage).

How often should mezzanines be inspected?

Best practice is a competent independent inspection annually, plus monthly in-house checks, and immediately after impact, modification or change of use. Frequency can vary based on risk, load and traffic.

Service Areas (Sydney & NSW)

We come to you across Greater Sydney and NSW industrial hubs.

  • Eastern Creek
  • Wetherill Park
  • Erskine Park
  • Botany
  • Alexandria
  • Ingleburn
  • Smithfield
  • Moorebank
  • Blacktown
  • Marsden Park
  • Campbelltown
  • Newcastle
  • Wollongong
  • Central Coast
  • Regional NSW (by arrangement)

FAQs

Do mezzanine floors legally require inspections?
There’s no single “mezzanine inspection” law, but NCC and relevant Australian Standards require the installation to be safe and fit-for-purpose. Regular inspections are a recognised way to demonstrate due diligence.
What standards do you reference?
We reference AS 1657 (stairs/guarding), AS/NZS 1170.1 (loads), AS 4100 (steel), the NCC, and AS 4084 for rack-supported mezzanines. We’ll note any specific local requirements that apply.
Can you fix issues you find?
Yes. We supply and install stairs, handrails, pallet gates, signage, decking and guarding to close out findings quickly.
Do I need council approval?
Many mezzanines require approvals or certification—especially for new, extended or repurposed use. We can help you scope what’s needed and point you to the right pathway.

Ready to make your mezzanine safer?

Enquire now

Note: Where engineering certification is required, we can arrange sign-off with a qualified structural engineer.